Port problems... Realy need some help!

[pzhukke]

Hi!

I've download Abyss Server X1, and when i test it, it doesn't work on my global IP..

I think it's my F***ING ZyXEL Prestige 600H router!

I've checked www.portforward.com, but it didn't work when i tested to open the ports...

So please!!!, help me..!

Thanks
Eric

[AbyssUnderground]

You need to forward the ports in your router before any traffic will be allowed through to the outside world.

Your router manual will tell you how to do this. If you have done this and you still cant access it then your router might not support loopback or port 80 isn blocked by your ISP.

Let us know what you have tried and the results you got so we have a better idea of what the problem is.
_________________
Andy (AbyssUnderground) (previously The Inquisitor)
www.abyssunderground.co.uk

[pzhukke]

Well, i've opened the configurator (192.168.1.1), and logged in.

Then i open the page SUA/NAT service, and i putted in port: 1024, 21 and 80.

Then i went to the FIREWALL, and i created a new rule in WAN to LAN packages, with Destination Address: 192.168.1.34 (Abyss is on another computer in the network), and choosed port TCP 21 (FTP) and port TCP 80 (HTTP) from the list below, i also created a new Customiszed Service, with port TCP 1024.

Then when i test the global ip + :1024 , :80 or :21 , it doesnt work! :-(

Any more help ? :P

[AbyssUnderground]

If this is windows firewall then try turning it off and trying again. If it still doesnt work chances are your router doesnt support loopback. This mean you cant see it but others probably can.

Try www.abyssunderground.co.uk/proxy and type your ip (and port if needed) into there.
_________________
Andy (AbyssUnderground) (previously The Inquisitor)
www.abyssunderground.co.uk