| View previous topic :: View next topic |
| Author |
Message |
gskmr2
-
Joined: 18 Sep 2004
Posts: 6
|
 Posted: Sat Jul 16, 2005 11:56 am Post subject: Cannot start the connection server |
 |
|
Hi all
I have an error message on starting up Abyss (X1) - You get the small screen up where it makes its connections but instead I get "Cannot start the connection server" message (I forget the exact one at present - checked port 80 and thats fine).
Recently I installed Trojan Guarder and checked the boxes for Deny Hacker and Deny Anonymous so thats probably done it! They didn't show any sign of a problem until after a restart, so does anyone know what would have been changed?
I mailed the makers of Trojan Guarder it but so far nothing.
I upgraded to the X2 version twice and both times I had to roll back - PHP scripts weren't executed properly and I use one right at the start to route to different directorys depending on the URL entered (It would only route to the first I think). Is this a problem others have had because I'd like to upgrade to the new one sometime.
Thanks,
Gav |
|
| Back to top |
   |
 |
gskmr2
-
Joined: 18 Sep 2004
Posts: 6
|
| Posted: Sat Jul 16, 2005 12:27 pm Post subject: Error message update |
|
|
| Its actually "Cannot launch the server process" |
|
| Back to top |
|
|
aprelium
-
Joined: 22 Mar 2002
Posts: 6800
|
| Posted: Sat Jul 16, 2005 1:28 pm Post subject: Re: Cannot start the connection server |
|
|
| gskmr2 wrote: |
I have an error message on starting up Abyss (X1) - You get the small screen up where it makes its connections but instead I get "Cannot start the connection server" message (I forget the exact one at present - checked port 80 and thats fine).
Recently I installed Trojan Guarder and checked the boxes for Deny Hacker and Deny Anonymous so thats probably done it! They didn't show any sign of a problem until after a restart, so does anyone know what would have been changed?
I mailed the makers of Trojan Guarder it but so far nothing.
|
This error message probably states that another program is already using port 80. To know which application is doing that, please read http://www.aprelium.com/forum/viewtopic.php?p=37625#37625 .
| Quote: |
I upgraded to the X2 version twice and both times I had to roll back - PHP scripts weren't executed properly and I use one right at the start to route to different directorys depending on the URL entered (It would only route to the first I think). Is this a problem others have had because I'd like to upgrade to the new one sometime.
|
"Weren't executed properly" is vague and does not explain us what is the error messages that you have got. Try installing the preconfigured PHP 5 package available in http://www.aprelium.com/abyssws/php5win.html .
If the error persists, please send to support@aprelium.com your abyss.conf file and the error message that you get with the PHP scripts.
_________________
Support Team
Aprelium - http://www.aprelium.com |
|
| Back to top |
|
|
gskmr2
-
Joined: 18 Sep 2004
Posts: 6
|
| Posted: Sat Jul 16, 2005 1:51 pm Post subject: Error message. |
|
|
The message I stated above, but anyway it was cured by reinstalling X1 suprisingly enough! (A google search didn't bring anything up for the error message)
With the new server I don't get aerror, it executes properly but doesnt do what its ment to (I know that probably means a coding error but it works fine with the X1 version). I did reinstall everything as new but still came up wrong.
I have about 9 sites all running off my home PC using Abyss - the addresses are no-ip ones and are distributed to different directories using a php script (the one you can find by searching the forums)
I'll get in touch with support if I decide to have another go, thanks for the advice and quick reply. |
|
| Back to top |
|
|
|
