ip problem

[niels]

hi my ip is 80.100.81.94
and my network ip is 10.0.0.152
my ftp server uses the 10.0.0.152 ip
so only people on my network can enter it
how can i fix it???

[jtc970]

use your wan ip and forward the correct ports to your lan ip

[niels]

howwwwww??

[niels]

howwwwww??

[jtc970]

somewhere between your computer and the internet you have a firewall/router. you need to set that to forward the port to your computer.

[niels]

what ports and i have norton internet security
and connection firewall is off
what ports do i need
i have a speedtouch modem
and 10.0.0.138 is my routers lan site

[niels]

and when i type 127.0.0.1 ill come at the spot where i putted al my files 8O

[niels]

and when i type 127.0.0.1 ill come at the spot where i putted al my files 8O

[iNaNimAtE]

Ok. 127.0.0.1, as you hopefully know, is localhost. That is your machine directly. Your router is blocking your internal ip (10.0.0.152) from your external, or "real world" ip (80.100.81.94). This is to be expected. What you need to do is change the configuration of your router to forward ports from 80.100.81.94 to 10.0.0.138. If all you doing is using a webserver, then all you need to do is forward port 80. I know nothing about your router or how it is set up, so I can't tell you how to get to the configuration. All I can guess is to type 10.0.0.1 (maybe...?) into your browser and see if it works. If you get a password prompt, type different combinations of "user" and "admin[istrator]."

Good luck.
_________________
Bienvenidos!

[niels]

when i go tho 10.0.0.138 i see this
Basic




Advanced


Static Routing


DNS


DHCP


NAT


Setup

what 1 do i need and ill post a screenshot of it[/img]

[niels]

maybe is this something??

IP address table




Intf Address/Netmask Type Translation
eth0 169.254.152.120/21 Extra pat

pppoa 80.100.84.91/32 Auto pat

eth0 169.254.151.120/16 Auto none

eth0 10.0.0.138/8 Extra none

loop 127.0.0.1/8 Auto pat



Click 'New' to create a new entry.





Help New


IP route table




Destination Source Gateway Intf
195.190.241.115/32 80.100.84.91/32 80.100.84.91 pppoa

80.100.84.91/32 127.0.0.1/32 10.0.0.152 eth0

127.0.0.1/32 80.100.84.91/32 80.100.84.91 pppoa

169.254.152.0/21 169.254.152.0/21 169.254.152.120 eth0

169.254.0.0/16 169.254.0.0/16 169.254.151.120 eth0

10.0.0.0/8 10.0.0.0/8 10.0.0.138 eth0

default 10.0.0.0/8 80.100.84.91 pppoa

169.254.152.120/32 any 169.254.152.120 eth0

195.190.241.115/32 any 80.100.84.91 pppoa

80.100.84.91/32 any 80.100.84.91 pppoa

169.254.151.120/32 any 169.254.151.120 eth0

255.255.255.255/32 any 10.0.0.138 eth0

10.0.0.138/32 any 10.0.0.138 eth0

127.0.0.1/32 any 127.0.0.1 loop

169.254.152.0/21 any 169.254.152.120 eth0

169.254.0.0/16 any 169.254.151.120 eth0

10.0.0.0/8 any 10.0.0.138 eth0

224.0.0.0/4 any 169.254.152.120* eth0

default any 169.254.152.120* eth0



Click 'New' to create a new entry.




Help New



All rights reserved © Copyright 2002, THOMSON multimedia

[jtc970]

im pretty sure that your looking for static routing
then route the correct port to your local ip 10.0.0.152

[niels]

yes but how?
i made a few screenshots maybe u can tell me what tho enter where please??


and this 1

thanks already poops

[iNaNimAtE]

Ok. In the "IP" routing, you should type this:
Destination: 10.0.0.152/80
Source: 80.100.81.94/80
Gateway: 10.0.0.138 (I'm not quite sure about this one, but try it anyway)
Interface: eth0 (switch to "pppoa" if this doesn't work)

You have an odd router/firewall, so this may not work. If it doesn't, then let me try to set it straight for you so you can figure it out on your own. "Destination" is your computer, having the internal IP of what I think is 10.0.0.152. "Source" can be one of the following: Your external (real-world) IP; 80.100.81.94, or your router/firewall; 10.0.0.138. Gateway could mean your router/firewall. I'm not quite sure about that one...

If this configuration does not work, switch some of the values around and it may work.
_________________
Bienvenidos!

[niels]

srry still nothing