| View previous topic :: View next topic |
| Author |
Message |
taliesin
-
Joined: 26 Jul 2004
Posts: 2
|
 Posted: Mon Jul 26, 2004 9:20 pm Post subject: Question about accessing server |
 |
|
I installed Abyss and placed my website in htdocs file I configured the firewall (sygate) to allow traffic on port 80 then I configured my dlink router to allow the computer to be an http server on port 80 then I put the computer in the dmz zone just to be sure. but I just dont seem to be able to access the server the address I use is my ip:port . I tried to find any info about my problem but was unable to (forgive me if I missed it) I am new at this so your patience is appreciated.
Taliesin |
|
| Back to top |
  |
 |
iNaNimAtE
-
Joined: 05 Nov 2003
Posts: 2381
Location: Everywhere you're not.
|
| Posted: Tue Jul 27, 2004 12:17 am Post subject: |
|
|
Your ISP most likely blocks port 80.
Change the Abyss port to 81, and change all of the other ports you configured to 81 also. Then try it.
Also, D-Link routers do not allow loopback. Have someone else (or Proxify.com) check your website.
_________________
Bienvenidos! |
|
| Back to top |
      |
|
taliesin
-
Joined: 26 Jul 2004
Posts: 2
|
| Posted: Tue Jul 27, 2004 1:28 am Post subject: |
|
|
Thank you, I had tried changing the port but I did not know about dlink not letting you loop back, as soon as I tried going through the annonymous proxy it worked. Again Thank you !!!!!!!
Taliesin |
|
| Back to top |
|
|
iNaNimAtE
-
Joined: 05 Nov 2003
Posts: 2381
Location: Everywhere you're not.
|
| Posted: Tue Jul 27, 2004 5:17 am Post subject: |
|
|
No problem--glad it worked.
_________________
Bienvenidos! |
|
| Back to top |
|
|
|
