View previous topic :: View next topic |
Author |
Message |
convicted_felon -
Joined: 13 Jun 2004 Posts: 1
|
Posted: Mon Jun 14, 2004 1:10 am Post subject: PPL cant see my site |
|
|
i can see my site using my own ip address but when i tell other ppl to go there they cant see it. i have tried changing the port to at least 20 different ones. i dont have any firewalls. |
|
Back to top |
|
|
iNaNimAtE -
Joined: 05 Nov 2003 Posts: 2381 Location: Everywhere you're not.
|
Posted: Mon Jun 14, 2004 1:13 am Post subject: |
|
|
You may not have any firewalls, but do you have a router? If you don't know, then how many computers do you have, and how many of them have internet? _________________ Bienvenidos! |
|
Back to top |
|
|
brucebolt -
Joined: 17 Apr 2004 Posts: 2
|
Posted: Mon Jun 14, 2004 4:12 pm Post subject: Same Problem! |
|
|
I have the same problem! I can't seem to get people who aren't on my network to view the site! HELP! |
|
Back to top |
|
|
brucebolt -
Joined: 17 Apr 2004 Posts: 2
|
Posted: Mon Jun 14, 2004 5:02 pm Post subject: SOLVED! |
|
|
Windows XP has it's one firewall - turn that off and voila! IT WORKS! |
|
Back to top |
|
|
iNaNimAtE -
Joined: 05 Nov 2003 Posts: 2381 Location: Everywhere you're not.
|
Posted: Mon Jun 14, 2004 6:12 pm Post subject: Re: Same Problem! |
|
|
brucebolt wrote: | I have the same problem! I can't seem to get people who aren't on my network to view the site! HELP! |
There is a thread right above this one that might help you... _________________ Bienvenidos! |
|
Back to top |
|
|
pickupman -
Joined: 21 Jun 2004 Posts: 4 Location: Ohio
|
Posted: Mon Jun 21, 2004 3:31 pm Post subject: |
|
|
I had the same problem using the standard port 80. I have been using a really high port number for my webmail server with no problem. I found a link on this forum https://grc.com/x/ne.dll?bh0bkyd2 which will scan ports. I had setup up port forwarding and open port for port 80 on my router but only computers on the network could see my site. After using the link I found that I couldn't get port 80 open. I chose and uncommon port (8001), tested it first with the link and showed up as STEALTH (closed / doesn't respond). I then changed my port forwarding and open port (firewall) for port 8001. Then changed my settings in aprelium from port 80 to port 8001, clicked restart. Tried the link testing port 8001 and it is now open. I use http://myurl:8001 now. |
|
Back to top |
|
|
iNaNimAtE -
Joined: 05 Nov 2003 Posts: 2381 Location: Everywhere you're not.
|
Posted: Mon Jun 21, 2004 9:40 pm Post subject: |
|
|
pickupman wrote: | I had setup up port forwarding and open port for port 80 on my router but only computers on the network could see my site. |
Your ISP most likely blocks port 80. _________________ Bienvenidos! |
|
Back to top |
|
|
|