View previous topic :: View next topic |
Author |
Message |
James Guest
|
Posted: Wed Aug 14, 2002 4:18 am Post subject: Problems w/ Installation |
|
|
:( I installed the server (1.0.7 TP) on my computer and nobody on another computer can view it. I've turned off my firewall completely and it still won't work. Any suggestions?
Thanks,
James |
|
Back to top |
|
|
aprelium -
Joined: 22 Mar 2002 Posts: 6800
|
Posted: Thu Aug 15, 2002 1:50 am Post subject: Re: Problems w/ Installation |
|
|
James wrote: | :( I installed the server (1.0.7 TP) on my computer and nobody on another computer can view it. I've turned off my firewall completely and it still won't work. Any suggestions?
Thanks,
James |
The common problem with routers is that they do NAT (Network Address Translation). So you should get your real IP (using http://www.myipaddress.com for example) and try with it.
You should also be sure that incoming trafic on your web port (80 by default) is not blocked by your ISP, your router or a software in your computer.
Please read older posts in the General Question section of that forum as they concern that topic. _________________ Support Team
Aprelium - http://www.aprelium.com |
|
Back to top |
|
|
JAMES Guest
|
Posted: Thu Aug 15, 2002 4:39 am Post subject: |
|
|
I'm not using a router. I'm chatting with my isp's tech support right now to find out if they block port 80. Can I switch to another port in case they do - such as 8080? |
|
Back to top |
|
|
aprelium -
Joined: 22 Mar 2002 Posts: 6800
|
Posted: Fri Aug 16, 2002 4:08 am Post subject: |
|
|
JAMES wrote: | I'm not using a router. I'm chatting with my isp's tech support right now to find out if they block port 80. Can I switch to another port in case they do - such as 8080? |
Of course you can do... Just open the console, select "Server Configuration", change the web port to 8080, and restart the server. _________________ Support Team
Aprelium - http://www.aprelium.com |
|
Back to top |
|
|
|