[HELP] when i access my server it redirects me to my router

[7-11]

why is that every time i access my webserver it always directs me to my router log-in page.... i port opened the port 96 and change the abbyss to port 96 also and still got the same error....my router is prolink 9200 modem/router.... my site is screen shots of my issues..

the site says.. my port 96 is open.... i also tried changing my port to 1024,5021 and still same error occurs.

EDITED : FOR SOME SECURITY REASONS

[TRUSTAbyss]

Your site works fine on port 96 (http://ranredemption.no-ip.org:96). The reason why you're getting the login when you go to "http://ranredemption.no-ip.org", is because your router may have remote configuration enabled; try to disable it, then try again (make sure port 80 is open for Abyss Web Server).

[7-11]

can you guide me disabling the remote configuration... coz i dont know how to.. theres no remote configuration in my router config.....

[quote]make sure port 80 is open for Abyss Web Server[\quote]

port 80 is blocked in my isp...

so my site is working when others view it...? http://ranredemption.no-ip.org:96/ran

[TRUSTAbyss]

If port 80 is blocked, just leave it at port 96 or higher and it should be fine. The only drawback to this is that you must append the port to the end of the URL.

[edstrang]

If you're accessing your website (http://www.yoururl.com:96 etc) from inside your network, your router might not support loopback, which means it will only display your router page. However, if you are accessing it from outside your network it will work (unless you have remote config enabled). To get around this, just use the internal IP of your web server when browsing inside your network (Your IP should be something like 192.168.0.2 or 10.10.10.2 etc)

Ed

[ahujagroup]

Hi,

First of all thank you for taking the time and help. For some reason when I typed in the commands you suggested I get this message ‘winipcfg’ is not recognized as an internal or external command, operable program or batch file.

I’m sorry if I cannot answer the questions you are asking me because honestly I don’t know how to perform some of those actions.

Thanks
p.s.
(if someone is interested by concerts in london , write in PM me)

[aprelium-support]

ahujagroup,

To know your IP config:

* Click on "Start" (in the Windows task bar) and select "Run...".

* Type: