| View previous topic :: View next topic |
| Author |
Message |
gunny
-
Joined: 25 Aug 2006
Posts: 9
|
 Posted: Tue Nov 06, 2007 10:08 am Post subject: linksys wanting me to log on to get on the webserver? |
 |
|
| i just installed 2.5 for the https..went step by step gerenating the ssl ..set the router to forward port 443. made sure the firewall would let abyss use port 443 and now the linksys asks me to login before letting me get to my webpage...im i missing somthing? why would the router stop me from accesing the webserver? i rechecked the linksys setting i didnt set anything extra just to forward the port 443 not any password to get in stuff...also what should be checked in the tcp/udp setting in the router for the port? |
|
| Back to top |
  |
 |
AbyssUnderground
-
Joined: 31 Dec 2004
Posts: 3855
|
| Posted: Tue Nov 06, 2007 11:06 am Post subject: |
|
|
Sounds like the routers remote access is on that port. You either need to turn it off or change the port in the settings.
_________________
Andy (AbyssUnderground) (previously The Inquisitor)
www.abyssunderground.co.uk |
|
| Back to top |
 |
|
gunny
-
Joined: 25 Aug 2006
Posts: 9
|
| Posted: Tue Nov 06, 2007 7:39 pm Post subject: |
|
|
| yep, remote acess port for my linksys. ill mess with it later..thanks |
|
| Back to top |
|
|
gunny
-
Joined: 25 Aug 2006
Posts: 9
|
| Posted: Wed Nov 07, 2007 2:27 am Post subject: |
|
|
ok i had a chance to look thru the linksys router and all i can find is this section...what do these need to be set at for the port 443 https so i wont try logging into my router while trying for the website? the ones with " * "
are enabled..
Block WAN Request: *Enable Disable
Multicast Pass Through: *Enable Disable
IPSec Pass Through: *Enable Disable
PPTP Pass Through: *Enable Disable
Remote Management: Enable *Disable Port:8080
Remote Upgrade: Enable *Disable
MTU: *Enable Disable Size:1492 |
|
| Back to top |
|
|
|
