View previous topic :: View next topic |
Author |
Message |
bigdee -
Joined: 14 Apr 2003 Posts: 2
|
Posted: Mon Apr 14, 2003 4:38 am Post subject: Cant change to port 80?! |
|
|
Man I cant change the abyss port thing to port 80?! When I do it gives me an error saying The port is already used by another application or the access to it is denied. Please help! It might be because of apache cause I installed it before but I uninstalled it I think. I dunno. But plz help cause I need to get it on port 80 or cant can get it to work! :evil: |
|
Back to top |
|
|
WhiteDevil -
Joined: 07 Oct 2002 Posts: 74 Location: United Kingdom
|
Posted: Mon Apr 14, 2003 8:27 am Post subject: |
|
|
you need a program called active ports (http://www.ntutility.com/freeware.html) it scans all the ports on your machine and tells you what program is running on it... _________________
|
|
Back to top |
|
|
vbgunz -
Joined: 02 Feb 2003 Posts: 615 Location: Florida
|
Posted: Mon Apr 14, 2003 3:27 pm Post subject: |
|
|
Are you trying to allow the console access to port 80? The console is much better at port 9999...
Console access should be any port above 9999 and to serve webpages should be port 80 or safe to go with 8000 or above.
Console access 9999+ but only on a port by itself.
Server port 80 or 8000+ but not on the console port.
WhiteDevil did recommend a good program to check your ports. It could be a firewall, anti-virus or another server blocking access. If the program isn't important on port 80 simply kill it but probably better to configure it to use another port.
Good luck :) _________________ Victor B. Gonzalez
http://aeonserv.com |
|
Back to top |
|
|
enko -
Joined: 29 Mar 2003 Posts: 33 Location: Canary Islands
|
Posted: Fri Apr 18, 2003 3:57 pm Post subject: NAPT |
|
|
Use napt and set 80 to your server local address |
|
Back to top |
|
|
|