View previous topic :: View next topic |
Author |
Message |
MUGH8506 -
Joined: 14 Jun 2004 Posts: 72 Location: Hell
|
Posted: Thu Jun 24, 2004 2:53 pm Post subject: |
|
|
my ISP blocks port 80, therefore it happes.
any Solution? _________________
http://www.trustabyss.com/ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Anonymoose -
Joined: 09 Sep 2003 Posts: 2192
|
Posted: Thu Jun 24, 2004 4:15 pm Post subject: |
|
|
Change ISP or don't use port 80. Which pretty much the jist of the very first post in this topic *sigh* |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
goku112 -
Joined: 22 Apr 2004 Posts: 16
|
Posted: Tue Jun 29, 2004 6:34 pm Post subject: |
|
|
well the thing is, im running the server off my main comp, and i dont have a router, just my ethernet adapter, which is directly connected to my cable modem, so what do i do then? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
iNaNimAtE -
Joined: 05 Nov 2003 Posts: 2381 Location: Everywhere you're not.
|
Posted: Tue Jun 29, 2004 7:25 pm Post subject: |
|
|
Maybe your ISP blocks port 80: try another port.
Have a firewall running: disable it.
Is your modem also a router with more than one LAN port: follow the guide. _________________ Bienvenidos! |
|
Back to top |
![ICQ Number ICQ Number](templates/subSilver/images/lang_english/icon_icq_add.gif) |
![](templates/subSilver/images/spacer.gif) |
goku112 -
Joined: 22 Apr 2004 Posts: 16
|
Posted: Tue Jun 29, 2004 9:23 pm Post subject: |
|
|
like what port? is there a way, that abyss, can autodetect a port? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
iNaNimAtE -
Joined: 05 Nov 2003 Posts: 2381 Location: Everywhere you're not.
|
Posted: Tue Jun 29, 2004 9:47 pm Post subject: |
|
|
Just choose another one. How's 21208? 1052? 9000? _________________ Bienvenidos! |
|
Back to top |
![ICQ Number ICQ Number](templates/subSilver/images/lang_english/icon_icq_add.gif) |
![](templates/subSilver/images/spacer.gif) |
renesommer -
Joined: 04 Aug 2004 Posts: 1
|
Posted: Fri Aug 06, 2004 3:32 pm Post subject: Great help. |
|
|
Thanks very much for your info.
It was a great help.
Note:
In my case the modem had to be configured the same way as the router. _________________ When I open the browser and fill in the IP address:port number I get the index page of the wireless modem. What is wrong? Please help.
Rene Sommer. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Stone-D -
Joined: 09 Jan 2004 Posts: 90
|
Posted: Fri Aug 06, 2004 5:53 pm Post subject: Re: Great help. |
|
|
renesommer wrote: | When I open the browser and fill in the IP address:port number I get the index page of the wireless modem. What is wrong? |
http://www.aprelium.com/forum/viewtopic.php?t=4753 _________________ --
Look, no SIG! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
offspringfreak4000 -
Joined: 30 Dec 2003 Posts: 7 Location: Bergen, Norway
|
Posted: Wed Aug 11, 2004 7:37 pm Post subject: Re: Can't view your website? Want a domain name? Look here! |
|
|
iNaNimAtE wrote: |
2) Go to your router configuration. Usually, you can type "192.168.1.1" or "192.168.0.1" in your browser to bring it up.
Helpful tip: After completing step 1, use the same digit(s) in the third block of your IP in step 2. Example: If your IP address from step 1 was "192.168.254.10," then use 254 to find your router (192.168.254.254). If your IP address was "192.168.1.10," then use "192.168.1.1" (taking the third block of numbers in your IP address, and putting them in the third and fourth place in step 2). |
it dosen't say what to go to if ur ip is 10.0.0.6 (like my'n is) what do i go to? _________________ .::If it could just teatch my dark heart to feel! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Quim -
Joined: 18 Aug 2004 Posts: 7 Location: Barcelona
|
Posted: Sat Aug 21, 2004 10:34 pm Post subject: |
|
|
No "forwarding" in my router configuration.
ROUTER: SpeedTouch 510
Menu:
Static routing. (IP Address- And Routing Tables)
DNS.
DHCP. (Dynamic Host Configuration Protocol)
NAT. (Network Address & Port Translation)
Setup. _________________ Easy is better |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
iNaNimAtE -
Joined: 05 Nov 2003 Posts: 2381 Location: Everywhere you're not.
|
Posted: Sun Aug 22, 2004 2:54 am Post subject: |
|
|
Thanks for putting that in bold. Easier is definitely better.
How to port forward with a SpeedTouch 510:
Start>Run>Type "command">Type "telnet 10.0.0.138"
The defaults are:
Username: admin
Password: blank
Then type:
JBL wrote: | nat
create protocol=tcp
inside_addr=10.0.0.X
inside_port=80
outside_addr=0
outside_port=80
save
quit
exit |
Replace 10.0.0.X with your address. _________________ Bienvenidos! |
|
Back to top |
![ICQ Number ICQ Number](templates/subSilver/images/lang_english/icon_icq_add.gif) |
![](templates/subSilver/images/spacer.gif) |
aionxn -
Joined: 17 Aug 2004 Posts: 8
|
Posted: Mon Aug 23, 2004 4:13 pm Post subject: |
|
|
what if i dont have a router? i only have a hub |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Bob Norris -
Joined: 22 Aug 2004 Posts: 39
|
Posted: Tue Aug 24, 2004 12:28 am Post subject: Anybody want to take on another one?? |
|
|
Same problem,, Router config. I have read all the material and tried everything but no luck. I can see the page but others cant. Somebody Please help!
Here is what ive done so far:
Windows XP
Cable Modem
External Router
I went into the base station management, found port forwding. I have these two options:
Application-triggered port forwarding
Application-triggered port forwarding accommodates programs that require multiple ports for data transmission. It opens an inbound (source) port only when data has been sent to a corresponding outbound (destination) port. Application-triggered port forwarding is useful when you play Internet games, hold video conferences, or use Internet telephony.
===================================================Or
Persistent port forwarding
Persistent port forwarding permanently opens specific inbound ports and sends all incoming data packets from those ports to a specific computer in your network. Persistent port forwarding is useful when you host a Web, File Transfer Protocol (FTP), or mail server on your network.
Im assuming its the second choice so I went in and set it up like this:
Description Inbound port(s) Type Private IP address Private port(s)
inbound ports 80 80 TCP 192.168.2.X Private Ports 80 80 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
hydrokayak -
Joined: 14 Sep 2004 Posts: 1
|
Posted: Tue Sep 14, 2004 2:08 am Post subject: thanks |
|
|
thanks 4 that help dude |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
808s -
Joined: 20 Sep 2004 Posts: 5
|
Posted: Tue Sep 21, 2004 9:00 pm Post subject: |
|
|
Can someone help me with this one.
Here's the facts:
- I have Telewell Ea400 adsl/swith
- i have no-ip.com accunt/address
- when i try to access it, the Ea400 box login screen comes up
- i couldn't find "forwarding" in anywhere.
What should i do/test? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Tusnal -
Joined: 23 Sep 2004 Posts: 1 Location: Spain
|
Posted: Thu Sep 23, 2004 11:17 pm Post subject: it doesnt work with my ip!!! |
|
|
well...... i did the router thing....... in tcp 80 with my local ip....... and nothin when i type my real ip in my browser i get timeout..... the only way i can see my site is locally "usin 127.0.0.1".....
i tested with proxys and it works fine..... when i am using a proxy i type my ip in the browser and i can the site perfect....... but why it doesnt work without a proxy??
is it a problem of the server or the router???
thx |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ghbhlb -
Joined: 08 Sep 2004 Posts: 7
|
Posted: Mon Oct 04, 2004 2:24 am Post subject: |
|
|
iNaNimAtE wrote: | Maybe your ISP blocks port 80: try another port.
Have a firewall running: disable it.
Is your modem also a router with more than one LAN port: follow the guide. |
iNaNimAtE -
Again, thank you for the tutorial. In the directions quoted above, you've instructed us to remove/diable a firewall. Windows XP SP2 gives the user all kinds of hell if the firewall is disabled. I'm sitting behind a router, so that should help a bit, but would turning off ZoneAlarm v. 5.1.033.000 be a safe option?
Granted, I don't have much of anything on my computer at home in regard to personal or financial information, but just the principle of leaving the firewall off has me scratching my head. If I want to keep ZA running, is there a way that I can allow Port 80 traffic through and block all the other stuff?
Many thanks! Again, my thanks for the tutorial and the other assistance provided on the forum. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jaipandya -
Joined: 20 Nov 2004 Posts: 2 Location: india
|
Posted: Sat Nov 20, 2004 6:51 pm Post subject: can't go to the web page |
|
|
i have installed abyss web server.
when i type my internal ip 10.0.2.113 in the address bar. it shows me the index.html file i have created. same when i type 127.0.1.1
i found my external ip is 202.149.32.11
but when i enter it in the address bar. why does it not show index.html ?
i tried 192.168.1.1 also. but it asks level username and password. i used admin and administrator. but didn't work.
and what it is all this........router? actually i am newbie to this all . so i don't know that.
i have 24 hrs cable connection. have windows xp. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
admin Site Admin
Joined: 03 Mar 2002 Posts: 1296
|
Posted: Wed Nov 24, 2004 11:47 am Post subject: Re: can't go to the web page |
|
|
jaipandya,
For your information, you cannot usually use your external IP from inside
your network. This IP brings the router configuration system. As a general
rule, depending on the location you are in, you should use a different IP
address.
Please read the following guide to know how to make your server accessible
(depending on the computer location) and how to configure your domain name:
Locally (from your computer), you can use 127.0.0.1 or localhost to access
the server. The full local URL is displayed in Abyss' main window (Local web
server URL).
To access your machine from another computer on your network (LAN), you
should use the LAN IP of the computer. Run the Windows command ipconfig in a
DOS command box to know this IP (it is usually of the form 192.168.*.* where
* are numbers ranging from 0 to 255). This LAN IP works only inside your
LAN.
To access the server from the outside, people should use your router's WAN
IP (or external IP). It is the IP assigned to it by your ISP. This WAN IP
can be known by browsing http://www.aprelium.com/ip from your computer. If
you have a router, you must configure it to forward incoming requests to the
web port to your computer so that Abyss Web Server can respond to them.
If your WAN IP changes often, You'll need to use the services of a free DNS
provider that can track those IP changes and give you a DNS name. We suggest
looking at http://www.dyndns.org or at
http://directory.google.com/Top/Computers/Software/Internet/Servers/Address_Management/Dynamic_DNS_Services/?tc=1 .
This way, you'll always access your server using an address like
http://www.yourserver.freednsprovider.com without paying attention to IP
changes.
You can also buy a top level domain name (for example,
my-company.com) and use the associate your external IP with it using the
registrar services or the free http://www.zoneedit.com/ . You can find more
information about this topic in
http://www.dslwebserver.com/main/domain-name.html . You can also find many
messages and discussions on our forum http://www.aprelium.com/forum about
DNS and domain names.
If you have problems to make your server reachable from the outside, we
recommend reading http://www.aprelium.com/abyssws/faq.html#A1-2 .
Notice that if you are using Windows XP, you must correctly configure its
internal Firewall: open the control panel, select the Networking section and
open the properties of your network interface. Select the Advanced Tab and
press the Parameters button (it should be in the bottom of the page). This
button will open a dialog where you can allow incoming connection to some
ports. If Abyss Web Server uses port 80, check the Web Server (HTTP) line.
If it uses another port, press Add... and enter the number of the port Abyss
uses as the internal port (select TCP and fill the other parameters
following the descriptions). |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jaipandya -
Joined: 20 Nov 2004 Posts: 2 Location: india
|
Posted: Wed Nov 24, 2004 6:28 pm Post subject: Re: can't go to the web page |
|
|
admin wrote: | For your information, you cannot usually use your external IP from inside
your network. This IP brings the router configuration system. |
when i enter this ip it only shows "The page cannot be displayed"
admin wrote: | (it is usually of the form 192.168.*.* where
* are numbers ranging from 0 to 255) |
First of all my ip(which i got by ipconfig in ms dos) is 10.0.2.113 .
admin wrote: | If
you have a router, you must configure it to forward incoming requests to the web port to your computer so that Abyss Web Server can respond to them.
|
so........how to know that i have a router or not? how to configure it? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
CapFusion -
Joined: 18 May 2003 Posts: 617 Location: Lost in Abyss' Dungeon
|
Posted: Wed Nov 24, 2004 6:54 pm Post subject: |
|
|
jaipandya
Quote: | so........how to know that i have a router or not? how to configure it? |
Very simple. It should indicate "router" on the appliance. _________________ CapFusion,... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
viet-cool -
Joined: 29 Nov 2004 Posts: 1
|
Posted: Mon Nov 29, 2004 4:10 am Post subject: |
|
|
Hi all!!! i'm new in here can any1 upload for me the ip_xp.bat file please, and I also have the problem that is when I view everything work but my friends view on their computer it doesn't work I need to change my Router Settings I know but can some1 upload the ip_xp.bat for me please? thanx |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Arctic -
Joined: 24 Sep 2004 Posts: 560
|
Posted: Thu Jan 06, 2005 11:14 pm Post subject: |
|
|
What is the best free domain that comes with DNS?
And what is the best (and cheapest) real domain name? |
|
Back to top |
![ICQ Number ICQ Number](templates/subSilver/images/lang_english/icon_icq_add.gif) |
![](templates/subSilver/images/spacer.gif) |
arthur92 -
Joined: 09 Jan 2005 Posts: 4
|
Posted: Sun Jan 09, 2005 8:49 pm Post subject: |
|
|
How can I configure the router???
When I type the IP address for configure the router, nothing appears, it's giving me a 404 error!!!
There exists a utility for configuring the router??? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Inxignio -
Joined: 19 Jan 2005 Posts: 4
|
Posted: Wed Jan 19, 2005 2:53 am Post subject: {} |
|
|
{}
Last edited by Inxignio on Thu Oct 26, 2017 4:40 am; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
elserge82 -
Joined: 19 Jan 2005 Posts: 1
|
Posted: Wed Jan 19, 2005 9:39 pm Post subject: I think there is no solution for my case |
|
|
I am on a LAN which I connect 2 throw a PPP protocol(it's a cable connection)
my ip is 10.12.10.27
when I connect I get an ip with DNS like 172.16.11.174
on these 2 ips+onn my hostname I can c my site but i don't think that som1 outside my LAN can reach it
when I tracert I can reach 2 ips 172.16.11.1 and 194.146.155.1
by usin www.getmyip I'm cin 194.146.153.1
I have no router access and donno 2 what i'm cennected 2+i'm behinde a proxy
I don't think that a solution can exist but i wanted 2 try my luck.
anyway reply me
here is a useful site for every tool u need hope u like it:
http://www.freeproxy.ru/en/free_proxy/info_about_you.htm |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Avatar -
Joined: 29 Jan 2005 Posts: 7
|
Posted: Mon Jan 31, 2005 6:05 pm Post subject: |
|
|
Alright, i have the same problem as you all, on my own network my i.p. which is 192.168.0.2 works on both computers, how do i figure out the router, 192.168.0.1 is the other comp on the network.
Do i just try my luck and add the I.P to my domain, since everytime i go there it just says cannot find server.
Please tell me what i have to do, i've been kicked off by my own host so know i'm trying to use my own computer.
Quote: | First of all my ip(which i got by ipconfig in ms dos) is 10.0.2.113 .
|
P.S. he also said 10.*.*.* |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Moxxnixx -
Joined: 21 Jun 2003 Posts: 1226 Location: Florida
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Avatar -
Joined: 29 Jan 2005 Posts: 7
|
Posted: Tue Feb 01, 2005 6:03 pm Post subject: |
|
|
I already know that.
With the port forwarding, How do i find my router? i looked on the site for a description and when i logged on, it was nothing other than information about my cable modem. Is there an online test to find out? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
TRUSTAbyss -
Joined: 29 Oct 2003 Posts: 3752 Location: USA, GA
|
Posted: Tue Feb 01, 2005 6:14 pm Post subject: |
|
|
Go to Start -> Run and type "command" without the quotes , now to find
your Router's address , type "ipconfig /all" without the quotes and use
Default Gateway as the addresss , an example http://192.168.1.1 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Avatar -
Joined: 29 Jan 2005 Posts: 7
|
Posted: Tue Feb 01, 2005 6:21 pm Post subject: |
|
|
The default gateway, is 192.168.0.1, i have seen this before on ipconfig, but its the other network computer and i want it to point to 192.168.0.2 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
TRUSTAbyss -
Joined: 29 Oct 2003 Posts: 3752 Location: USA, GA
|
Posted: Tue Feb 01, 2005 7:59 pm Post subject: |
|
|
If you have MSN Messenger , please add me to your MSN and I will help you
setup your server through live tech support , I have helped many people.
My MSN: msn@trustabyss.com |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Avatar -
Joined: 29 Jan 2005 Posts: 7
|
Posted: Tue Feb 01, 2005 8:57 pm Post subject: |
|
|
Thnx i will sure do, But i see you live in the U.S.(wheras i am in the U.K.) what times are you on MSN That way i know when to go on, Thnx a bunch. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
TRUSTAbyss -
Joined: 29 Oct 2003 Posts: 3752 Location: USA, GA
|
Posted: Tue Feb 01, 2005 11:23 pm Post subject: |
|
|
I can't really give you a time because some times im on and some times im
not , just be on MSN and I will get in touch with you as soon as possible. :) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Avatar -
Joined: 29 Jan 2005 Posts: 7
|
Posted: Thu Feb 03, 2005 5:46 pm Post subject: |
|
|
Is there no way you can say how to do it on the Forum?
Also i know this may sound stupid, but i seriously cannot find my router, I don't think i even have one, I mean i have looked for a big box with flashing lights coming out of it and thats my cable modem.
and when i get the I.P of that 192.168.100.1 there is no username and password its just a configuration manager of my cable modem.
Is there a way to forward it to my computer without a Router? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
putang -
Joined: 07 Mar 2005 Posts: 5
|
Posted: Thu Mar 10, 2005 9:08 pm Post subject: |
|
|
I've been trying to configure my Abyss server for awhile now and from what I understand I need to do some port forwarding if my router is blocking incoming connection into my webserver. I also found out that the IP I'm getting from http://www.aprelium.com/ip changes everyday. In order for "port forwarding" to function, I need to set up my IP to be static. I followed all the instructions in http://www.portforward.com/motorola/wr850g.htm for port forwarding and setting static IP. I'm using port 8080 since my ISP seems to be blocking port 80. Here's some screenshots:
I didn't fully understand the instruction in http://www.portforward.com/motorola/wr850g-dhcp.htm step4. Also, in setting up my static IP in Control Panel/Network/Properties, ipconfig/all command gives me 4 identical IP numbers with 192.168.10.x See below screenshot.
I really need some guide going through here. Thanks |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
yoyo3344 -
Joined: 15 Mar 2005 Posts: 7
|
Posted: Thu Mar 17, 2005 9:23 am Post subject: |
|
|
putang wrote: |
|
Same here-4 identical. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Anonymoose -
Joined: 09 Sep 2003 Posts: 2192
|
Posted: Thu Mar 17, 2005 2:47 pm Post subject: |
|
|
They are not identical. The first one is different from the last 3.
The line IP Address 192.168.10.2 is your PC's IP address.
The other 3 - default gateway, dhcp server and dns server - are the IP of your router.
Quote: |
I also found out that the IP I'm getting from http://www.aprelium.com/ip changes everyday. In order for "port forwarding" to function, I need to set up my IP to be static.
|
The IP you are getting from Aprelium is your WAN/internet IP. This is the IP others will use to access you site. You cannot control this, or make it static (without paying your ISP extra). However, you do not need a static WAN IP.
The instructions are to set a static LAN IP for your server PC.
http://www.portforward.com/networking/staticip-dhcp.htm
It has also been explained previously in this thread and elsewhere on the forum. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jlp09550 -
Joined: 05 Jun 2005 Posts: 123 Location: Louisiana, USA
|
Posted: Thu Jun 09, 2005 7:32 pm Post subject: |
|
|
OK... I need to know... if I have a anti-virus program AND have the latest updates from Windows Update installed up-to-the-minute, is it better to use DMZ than regular? _________________ Hosted Abyss Sites-
http://jared.chibipaws.com/ - My Stuffs
http://jaredblog.chibipaws.com/ - My Blog |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Anonymoose -
Joined: 09 Sep 2003 Posts: 2192
|
Posted: Fri Jun 10, 2005 9:12 am Post subject: |
|
|
No, there is no need. It will not improve the operation of Abyss in any way.
Abyss only needs one port open - 80. If you're only hosting a webserver, there is absolutely no need to use DMZ. I consider myself an advanced user and my knowledge of Windows security pretty damn good, but I still keep my server behind the router rather than DMZ'd. It's just not worth the risk.
If you're also hosting an FTP, DMZ can make life easier in terms of active connections from other users who are also behind routers, but in the long run for a small site it's easier to forward a range of ports and tell users to use passive connections.
When you have only port 80 open, the only risk that you're taking is running Abyss - which has been proved to be well secured and safe.
If you put your machine in the DMZ, all ports on your server are portentially accessible from the internet - this means any software that is allowed to listen for incoming connections is then a potential security risk. This is slightly mitigated by a personal firewall, but then the firewall itself becomes one more potential security hole.
I don't want to be busy at work the day someone discovers a way of remotely killing my software firewall then discovers some new Windows 0day... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
p3 -
Joined: 17 Jun 2005 Posts: 615
|
Posted: Fri Jun 17, 2005 12:44 am Post subject: THANK YOU!! |
|
|
Thank you very much! I've spent all afternoon working on this - I can't believe it was so simple! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Obscuredego -
Joined: 22 Jun 2005 Posts: 2
|
Posted: Wed Jun 22, 2005 4:57 am Post subject: Satellite Help... |
|
|
Internet users can not access my page. I'll give as
much information as I can. I have DirecWay Satellite
internet modem plugged right in, no router,
firewall turned off, and Windows XP. I have my
index.html set up and can view it at http://127.0.0.1/
and http://localhost/. Several websites, including
this one, display my ip as being...Your IP address is
66.82.9.85 I am set up on port 80. When I go to
Network Connections and to properties it says my
DNS server is 66.82.4.8 I know I'm probably missing
something. I even have Networking set up to accept
incoming connections but no devices are listed I guess
because I don't have a router/hub but I done it
anyway just in case. If anyone has any suggestions
please help. Thanks. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Anonymoose -
Joined: 09 Sep 2003 Posts: 2192
|
Posted: Wed Jun 22, 2005 8:47 am Post subject: |
|
|
Your IP resolves to AC5-Webproxy68.direcpc.com - I'm guessing that's some kind of transparent proxy server that your ISP has in place. You will need to find your real IP before you can make any more progress... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Obscuredego -
Joined: 22 Jun 2005 Posts: 2
|
Posted: Wed Jun 22, 2005 5:33 pm Post subject: Satellite Help... |
|
|
Here are all the details at 192.168.0.1(DirecWay Satellite Modem)
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
NAT IP Address: 67.44.211.231
NAT Subnet Mask: 255.255.255.255
Router Address: 66.82.26.91
My Ip changed since yesterday because I reset
my modem. Today my Ip shows as 66.82.9.66
but usually stays the same unless reset or lose power.
Apparently this modem gets a router address to(above).
On the system status and signal page it says my
Operational; Upstream Addr: 66.82.9.66 Just thought I'd
through that in there. Is there another way to find an ip.
DirecWay is either hiding it or going through hundreds of
routers or something could be configured wrong. If anyone
has any suggestions about all these numbers and how
others can connect to my pc...please feel free. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Bloodbath187 -
Joined: 25 Jan 2004 Posts: 6
|
Posted: Sat Jun 25, 2005 7:43 am Post subject: |
|
|
THIS HELPED ME OUT SOOO MUCH! thanks thanks |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Kernal -
Joined: 25 Jun 2005 Posts: 7
|
Posted: Sat Jun 25, 2005 1:01 pm Post subject: Bah. 401 Authorization Required. |
|
|
How am I supposed to run a webserver on my network if the little internet/lan box needs authorization to get access to it? Better yet, even if I did manage to prusade my mum or Niel to give me the username and pass, then hackers would screw up our internet.
Is there anyway pass the dammn little box without having to enter authorozation stuff? And then, how would people get access to my page when stupid No Ip.com says: The IP address you entered is invalid. Please enter a non-private IP network address when I try entering in 144.137.52.139:80 as the IP adress, and also when I try entering in 144.137.52.139:10002 as the IP address.
So, how do I get my website online (which is what I asked in my topic before, but I was told to read this topic.)? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Anonymoose -
Joined: 09 Sep 2003 Posts: 2192
|
Posted: Sat Jun 25, 2005 4:12 pm Post subject: Re: Bah. 401 Authorization Required. |
|
|
Kernal wrote: | How am I supposed to run a webserver on my network if the little internet/lan box needs authorization to get access to it? Better yet, even if I did manage to prusade my mum or Niel to give me the username and pass, then hackers would screw up our internet. |
If you don't have access to your routers configuration, you don't get online, simple as that. Time to go sign up for a Geocities account until you're old enough to be allowed to play on the real internet. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Kernal -
Joined: 25 Jun 2005 Posts: 7
|
Posted: Sun Jun 26, 2005 12:54 am Post subject: Re: Asking for log in |
|
|
rbad832654 wrote: | Hi
I am getting the log in request after I followed all of the recomended operations above. I don't know where it is comming from I have loged in using the log in for the router The Abyss Web server and on and on. here is what I have
Windows XP Home
DSL Modem Vision Net
DLink Router model DI 604
Ip address 192.168.0.101
Sub Net Mask 255.255.255.0
Default Gateway 192.168.0.1
External IP 12.18.163.27
I put the external IP in my web browser (IE 6.) and then I get in a small window:
Connect to 12.18.163.27
Home gateway
User Name _______________
Password _______________
I Have no ideal where this is comming from
Help if you can
Thanks
Rbad832654 |
Luckily for you, I used to have that type of router. As that other person said, this is the setup page for your router. As deafult, the user name is admin, and the password is 123. If that doesn't work, try using 1234 as the password. If that doesn't work, try leaving the password blank. And if that doesn't work, look up Port fowarding DI 604 on Google. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Anonymoose -
Joined: 09 Sep 2003 Posts: 2192
|
Posted: Sun Jun 26, 2005 1:19 am Post subject: Re: Asking for log in |
|
|
Kernal wrote: |
Luckily for you, I used to have that type of router. |
Unluckily for him, you are a year and 10 days too late. Congratulations.
Posted: Wed Jun 16, 2004 4:55 am
Feel free to check the date on posts before replying to them. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Kernal -
Joined: 25 Jun 2005 Posts: 7
|
Posted: Sun Jun 26, 2005 1:20 am Post subject: Re: Bah. 401 Authorization Required. |
|
|
Anonymoose wrote: | Kernal wrote: | How am I supposed to run a webserver on my network if the little internet/lan box needs authorization to get access to it? Better yet, even if I did manage to prusade my mum or Niel to give me the username and pass, then hackers would screw up our internet. |
If you don't have access to your routers configuration, you don't get online, simple as that. Time to go sign up for a Geocities account until you're old enough to be allowed to play on the real internet. |
I got into my routers configuration, so yeah, I can get the Abyss Web Server up and running.
Problem is, when I type in my IP address (my internet box is also a router) and put :60 at the end (which is the port that Abyss Web Server has the host running on), the page doesn't change. (and yes, I pushed enter. Duh.)
And yes, I clicked Apply (you can't see the apply button in the screenie.)
Should I have changed the Redirect IP Adress? If so, to what?
Edit 2: Never mind, I've got it working now :D
Didn't bother to check if my IP had changed after I configured the ports lol
Please test it at: http://144.137.53.60:60/ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|