View previous topic :: View next topic |
Author |
Message |
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Fri Aug 25, 2006 10:20 pm Post subject: Please help me out... |
|
|
I set up my Abyss server and my port forwarding and everything was working flawlessly. Then yesterday I tried to access my site and it doesn't show up. I get the dreaded "Problem Connecting" error and it's driving me out of my mind. The only thing that happened before this error was that my internet browser didn't connect to the internet, but a quick restart did the trick. I can't even view my site from my IP and it is making me extremely angry because I haven't touched anything to mess with it. If you guys could help me out I would be extremely grateful. My IP is 72.49.79.174 if you need it. Thanks in advance! |
|
Back to top |
|
|
bprsk8r4272 -
Joined: 07 Mar 2006 Posts: 124 Location: Rochester, NY
|
Posted: Fri Aug 25, 2006 10:22 pm Post subject: |
|
|
whats your web address _________________
|
|
Back to top |
|
|
Mikor -
Joined: 21 Aug 2006 Posts: 144 Location: Hull, England
|
Posted: Fri Aug 25, 2006 10:42 pm Post subject: |
|
|
try connecting to "localhost" _________________ Yarrt.com - Free Arcade
RypNet.co.uk - Online Game
MSN: michael_walker_2004 <at> hotmail <dot> com |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Fri Aug 25, 2006 10:45 pm Post subject: |
|
|
bprsk8r4272 wrote: | whats your web address |
www.crazychipmunk.com
But why does that matter if I can't even view it from my IP address? |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Fri Aug 25, 2006 10:46 pm Post subject: |
|
|
Mikor wrote: | try connecting to "localhost" |
It works when I go to "localhost", but I still can't view it from my IP. |
|
Back to top |
|
|
Mikor -
Joined: 21 Aug 2006 Posts: 144 Location: Hull, England
|
Posted: Fri Aug 25, 2006 11:03 pm Post subject: |
|
|
hblott14 wrote: | Mikor wrote: | try connecting to "localhost" |
It works when I go to "localhost", but I still can't view it from my IP. |
I cant see it when I go to your url or ip, have you forwarded port 80 in your router? _________________ Yarrt.com - Free Arcade
RypNet.co.uk - Online Game
MSN: michael_walker_2004 <at> hotmail <dot> com |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Fri Aug 25, 2006 11:14 pm Post subject: |
|
|
Yes, I have forwarded port 80. It was all working fine a couple days ago. |
|
Back to top |
|
|
pkSML -
Joined: 29 May 2006 Posts: 952 Location: Michigan, USA
|
Posted: Sat Aug 26, 2006 12:28 am Post subject: |
|
|
What router do you have? I have had router troubles in the past.
Try resetting or restarting your router. Then recheck your IP address. _________________ Stephen
Need a LitlURL?
http://CodeBin.yi.org |
|
Back to top |
|
|
bprsk8r4272 -
Joined: 07 Mar 2006 Posts: 124 Location: Rochester, NY
|
Posted: Sat Aug 26, 2006 12:50 am Post subject: |
|
|
has your ip changed since you set up the domain name? and are you using zone edit? _________________
|
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Sat Aug 26, 2006 4:32 am Post subject: |
|
|
bprsk8r4272 wrote: | has your ip changed since you set up the domain name? and are you using zone edit? | No, My IP has not changed and I am using zone edit. |
|
Back to top |
|
|
olly86 -
Joined: 25 Apr 2003 Posts: 993 Location: Wiltshire, UK
|
Posted: Sat Aug 26, 2006 12:27 pm Post subject: |
|
|
Your ISP might have started blocking accesses on port 80, try using another port, 81 for instance. _________________ Olly |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Sun Aug 27, 2006 2:52 pm Post subject: |
|
|
I tried using another port and it still didn't work. |
|
Back to top |
|
|
pkSML -
Joined: 29 May 2006 Posts: 952 Location: Michigan, USA
|
Posted: Sun Aug 27, 2006 6:45 pm Post subject: |
|
|
Answering these questions might shed some light on the issue you're having.
What router do you have? What firmware version is your router using? _________________ Stephen
Need a LitlURL?
http://CodeBin.yi.org |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Sun Aug 27, 2006 7:24 pm Post subject: |
|
|
I am using a Linksys BEFW11S4 V4 and it is running Firmware version 1.45.3 |
|
Back to top |
|
|
pkSML -
Joined: 29 May 2006 Posts: 952 Location: Michigan, USA
|
Posted: Sun Aug 27, 2006 8:18 pm Post subject: |
|
|
There is new firmware for you router. That would be my first suggestion. You can find it here.
Here are 2 questions and a suggestion.
Question #1: How do you have port 80 forwarded (in your router setup)? It should be UPnP forwarding port 80 using TCP to your server's 192.168.1.xxx IP address.
Question #2: Did your server's internal IP address change? Such a little change like this will completely cause your web server to quit working to the outside world.
-I have my server's internal IP address manually set to avoid this problem.
Suggestion: To find the source of the problem, you can try the process of elimination. Hook your server directly up to your cable or DSL modem. Then access http://your-ip-address.
If it works, the router was your problem. If it still is not working, it could be your ISP or your computer. _________________ Stephen
Need a LitlURL?
http://CodeBin.yi.org |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Sun Aug 27, 2006 8:51 pm Post subject: |
|
|
Thanks for the help! It turns out my internal IP had changed. It works for me when I go to my external IP now, can you test it for me to make sure? |
|
Back to top |
|
|
Mikor -
Joined: 21 Aug 2006 Posts: 144 Location: Hull, England
|
Posted: Sun Aug 27, 2006 9:19 pm Post subject: |
|
|
hblott14 wrote: | Thanks for the help! It turns out my internal IP had changed. It works for me when I go to my external IP now, can you test it for me to make sure? |
Not working for me, also, in your router settings cant you set static internal IPs? _________________ Yarrt.com - Free Arcade
RypNet.co.uk - Online Game
MSN: michael_walker_2004 <at> hotmail <dot> com |
|
Back to top |
|
|
bprsk8r4272 -
Joined: 07 Mar 2006 Posts: 124 Location: Rochester, NY
|
Posted: Sun Aug 27, 2006 11:52 pm Post subject: |
|
|
yes you have to make a static ip if you call linksys they will tell you how to do so that is what i had to do _________________
|
|
Back to top |
|
|
hc2995 -
Joined: 07 Aug 2006 Posts: 644 Location: Maryland, USA
|
Posted: Mon Aug 28, 2006 12:00 am Post subject: |
|
|
lmao this happens to me. For some reason or another your router mayhave changed your internal IP address do this to fix it:
WINDOWS XP ONLY!
1. start->run->type "cmd"->type "ipconfig/all" and find your IP address
2. go to the ip for your router (something like 192.168.1.1 or something)
3. make sure your ip from the comand program matches your ip in the forwarding part of your router
4. if it does then this isnt the problem. if its different then change it so they match
Problem solved :D _________________ Where have i been? School got heck-tick, had to move half way around the state, then back... and then i had to change jobs, so iv been away for a while :P |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Mon Aug 28, 2006 3:19 am Post subject: |
|
|
What is a static IP? |
|
Back to top |
|
|
bprsk8r4272 -
Joined: 07 Mar 2006 Posts: 124 Location: Rochester, NY
|
Posted: Mon Aug 28, 2006 5:13 am Post subject: |
|
|
hblott14 wrote: | What is a static IP? |
just call linksys they'll tell you what to do but basically its your internal ip _________________
|
|
Back to top |
|
|
AbyssUnderground -
Joined: 31 Dec 2004 Posts: 3855
|
Posted: Mon Aug 28, 2006 11:01 am Post subject: |
|
|
Static IP's can be internal and/or external, it depends on your ISP and your router setup.
You should use a static internal IP to avoid DHCP assigning a new IP to your computer, and rendering your port forwarding rules invalid.
Find in your router the setting for DHCP. Set the range of DHCP to start at 192.168.1.110. Now go to the status page where it states all of the IP addresss etc.
Now go into the IP settings for Windows and set them according to the status page.
You will need to set a unique IP address for each PC you make a static IP for. Your PC should be 192.168.1.100 (if thats the range it uses).
The subnet mask will probably be default 255.255.255.0.
The gateway is the same as your routers IP, in my case 192.168.1.1.
The DNS server IP's are the two stated in your router settings. These vary by ISP.
Once you click OK your computer should reconfigure itself and if its worked your internet should still work and your internal IP will have changed. If it didnt work, don't panic. Go back into the IP settings in windows, and set it back to automatic, click OK and it should set it back to automatic settings again.
Remember to set your routers port forwarding for the 192.168.1.100 address when its working.
I hope this info helps. _________________ Andy (AbyssUnderground) (previously The Inquisitor)
www.abyssunderground.co.uk |
|
Back to top |
|
|
pkSML -
Joined: 29 May 2006 Posts: 952 Location: Michigan, USA
|
Posted: Mon Aug 28, 2006 11:15 pm Post subject: |
|
|
It's much easier to manually configure the IP address of the server computer from the server .
Here are directions for Windows XP.
1. Get information
Control Panel -> Network Connections -> Local Area Connection
Click on "Support" tab. Click "Details".
-----
Get your IP address, subnet mask, default gateway, DNS servers, and any other pertinent information.
2. Set your IP address.
Go back to your local area connection status box on the "General" tab.
Click "Properties". Select "Internet Protocol (TCP/IP)". Click "Properties".
Instead of obtaining IP address automatically, select "Use the following IP address".
* Be sure when typing in the IP address your server is to have, make it about 100 more. For example, if the server's IP is 192.168.1.105, make the server's manually-set IP to 192.168.1.205. Set the subnet mask, gateway, and DNS servers.
Does this help? _________________ Stephen
Need a LitlURL?
http://CodeBin.yi.org |
|
Back to top |
|
|
AbyssUnderground -
Joined: 31 Dec 2004 Posts: 3855
|
Posted: Mon Aug 28, 2006 11:39 pm Post subject: |
|
|
Nice of you to explain exactly what I just explained. _________________ Andy (AbyssUnderground) (previously The Inquisitor)
www.abyssunderground.co.uk |
|
Back to top |
|
|
pkSML -
Joined: 29 May 2006 Posts: 952 Location: Michigan, USA
|
Posted: Tue Aug 29, 2006 12:48 am Post subject: |
|
|
Oops...
I didn't see your post before I posted. It took me a little while to craft my response.
Anyways, maybe two explanations might help. ;) _________________ Stephen
Need a LitlURL?
http://CodeBin.yi.org |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Tue Aug 29, 2006 1:01 am Post subject: |
|
|
OK, I'll try this. By the way, what do you do when Abyss says "Halted" and the red dot flashes on the Abyss logo in the toolbar? |
|
Back to top |
|
|
pkSML -
Joined: 29 May 2006 Posts: 952 Location: Michigan, USA
|
Posted: Tue Aug 29, 2006 1:05 am Post subject: |
|
|
Double click on the Abyss icon (which is blinking red). It will bring up the dialog box for the program.
What does it say in the gray text box? _________________ Stephen
Need a LitlURL?
http://CodeBin.yi.org |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Tue Aug 29, 2006 2:57 am Post subject: |
|
|
It says:
"Abyss Web Server X1 (v 2.3.2)
Copyright © Aprelium Technologies - 2001-2006
Cannot listen to the console port " |
|
Back to top |
|
|
Mikor -
Joined: 21 Aug 2006 Posts: 144 Location: Hull, England
|
Posted: Tue Aug 29, 2006 5:29 am Post subject: |
|
|
hblott14 wrote: | It says:
"Abyss Web Server X1 (v 2.3.2)
Copyright © Aprelium Technologies - 2001-2006
Cannot listen to the console port " |
That means the port for the console is being used for something else (or a firewall is blocking it) _________________ Yarrt.com - Free Arcade
RypNet.co.uk - Online Game
MSN: michael_walker_2004 <at> hotmail <dot> com |
|
Back to top |
|
|
aprelium -
Joined: 22 Mar 2002 Posts: 6800
|
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Fri Sep 01, 2006 1:27 am Post subject: |
|
|
pkSML wrote: | It's much easier to manually configure the IP address of the server computer from the server .
Here are directions for Windows XP.
1. Get information
Control Panel -> Network Connections -> Local Area Connection
Click on "Support" tab. Click "Details".
-----
Get your IP address, subnet mask, default gateway, DNS servers, and any other pertinent information.
2. Set your IP address.
Go back to your local area connection status box on the "General" tab.
Click "Properties". Select "Internet Protocol (TCP/IP)". Click "Properties".
Instead of obtaining IP address automatically, select "Use the following IP address".
* Be sure when typing in the IP address your server is to have, make it about 100 more. For example, if the server's IP is 192.168.1.105, make the server's manually-set IP to 192.168.1.205. Set the subnet mask, gateway, and DNS servers.
Does this help? | When I double-click on my LAN ison it brings up a box, but it doesn't have a "Support" tab. And Abyss Underground's way confuses me. |
|
Back to top |
|
|
pkSML -
Joined: 29 May 2006 Posts: 952 Location: Michigan, USA
|
Posted: Fri Sep 01, 2006 3:15 am Post subject: |
|
|
First of all, what operating system are you using? I have WinXP Home, so these instructions are tailored as such.
The best way to get your information about your IP address is just to tinker around. You'll probably find it by clicking around. :)
Actually, you can get your IP information that I told you you needed by going to the command prompt (Start -> Run -> cmd.exe) and typing ipconfig /all. Again, write down your IP address, subnet mask, default gateway, and DNS servers. When you set your IP address manually, you need this information.
Refer to my last post at #2 to set your IP address manually.
Does this help you? _________________ Stephen
Need a LitlURL?
http://CodeBin.yi.org |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Sat Sep 02, 2006 1:07 pm Post subject: |
|
|
Thanks for the help everyone. I think I finally got this all to work. Test it at www.crazychipmunk.com or my IP which I mentioned earlier. |
|
Back to top |
|
|
pkSML -
Joined: 29 May 2006 Posts: 952 Location: Michigan, USA
|
Posted: Sat Sep 02, 2006 2:13 pm Post subject: |
|
|
Congraduations! It works perfectly. Excellent load time, too. :) _________________ Stephen
Need a LitlURL?
http://CodeBin.yi.org |
|
Back to top |
|
|
hblott14 -
Joined: 23 Aug 2006 Posts: 15
|
Posted: Sat Sep 02, 2006 2:14 pm Post subject: |
|
|
Thanks, BTW, how can I get a sig like yours with all my server stats? |
|
Back to top |
|
|
pkSML -
Joined: 29 May 2006 Posts: 952 Location: Michigan, USA
|
Posted: Sat Sep 02, 2006 2:28 pm Post subject: |
|
|
I can PM the info to you. It's a PHP script that generates the image. _________________ Stephen
Need a LitlURL?
http://CodeBin.yi.org |
|
Back to top |
|
|
|