"Could not connect"

 
Post new topic   Reply to topic    Aprelium Forum Index -> Networking Issues
View previous topic :: View next topic  
Author Message
simoncab2
-


Joined: 24 Mar 2004
Posts: 2

PostPosted: Thu Mar 25, 2004 12:00 am    Post subject: "Could not connect" Reply with quote

All righty!

I'm behind an ActionTec router. Windows XP, DSL connection, Pent. 4 processor.

My LOCAL ip address is: 192.168.0.12
My router's PUBLIC ip address is (currently): 64.65.145.133
My router's LOCAL ip address is: 192.168.0.1/
My no-ip address is: http://designco.serveftp.com

I have port 8080 properly forwarded to my local ip address and CanYouSeeMe.org confirms it is open.
Router configuration is as such:
"8080-8081 tcp 192.168.0.12"

When I run Abyss, it says this:

---------------------------------
Abyss Web Server X1 (v 1.2.2.2)
Copyright © Aprelium Technologies - 2001-2004

Web server local URL: http://127.0.0.1:8000/
Console local URL: http://127.0.0.1:9999/

Web server local URL: http://127.0.0.1:8000/
Console local URL: http://127.0.0.1:9999/

Web server local URL: http://127.0.0.1:8000/
Console local URL: http://127.0.0.1:8080/
------------------------------------

Now, here's the problem:

When I check my website from a computer OUTSIDE of my LAN, whose internet connection is indeed working, I get a "cannot connect" or "connection refused" error.

When I check it from a computer INSIDE of my LAN, I geet my router's configuration page.


I hope i provided adequate information and any help would be greatly appreciated!

Thanks!

Scott
Back to top View user's profile Send private message
nquin321
-


Joined: 29 Jan 2004
Posts: 296
Location: Right Behind You

PostPosted: Thu Mar 25, 2004 12:12 am    Post subject: Reply with quote

Quote:
Web server local URL: http://127.0.0.1:8000/


did you also forward port 8000

i was able to get your abyss config page on port 8080

you shold be able to access your website at http://designco.serveftp.com:8000
_________________
How many forum members does it takes to change a light bulb?
Back to top View user's profile Send private message
TRUSTAbyss
-


Joined: 29 Oct 2003
Posts: 3752
Location: USA, GA

PostPosted: Thu Mar 25, 2004 12:24 am    Post subject: Reply with quote

You must have forgot to change the port
inside the Abyss Web Server console to
port 8080 , do that and you will be up ! 8)

Also your router should be setup like
ports 8080 to 8080 not 8080 to 8081
Back to top View user's profile Send private message Visit poster's website
simoncab2
-


Joined: 24 Mar 2004
Posts: 2

PostPosted: Thu Mar 25, 2004 12:36 am    Post subject: Reply with quote

Thanks for the help and quick reply!

I'm new to all this, didn't relize you had to specify the port in the browser!
Back to top View user's profile Send private message
nquin321
-


Joined: 29 Jan 2004
Posts: 296
Location: Right Behind You

PostPosted: Thu Mar 25, 2004 2:57 am    Post subject: Reply with quote

you only have to specify the port if you are not using port 80.
_________________
How many forum members does it takes to change a light bulb?
Back to top View user's profile Send private message
iNaNimAtE
-


Joined: 05 Nov 2003
Posts: 2381
Location: Everywhere you're not.

PostPosted: Thu Mar 25, 2004 4:54 am    Post subject: Reply with quote

And about the internal problem: If you try to access your IP from inside the network, a majority of routers will not allow you. Instead, like you said, they will show the configuration page.
_________________
Bienvenidos!
Back to top View user's profile Send private message Send e-mail Visit poster's website AIM Address Yahoo Messenger MSN Messenger ICQ Number
Pixilated
-


Joined: 12 Mar 2003
Posts: 2

PostPosted: Sun Mar 28, 2004 10:09 am    Post subject: Reply with quote

There's a great utility at http://www.psi-rho.com/dsltools/test.php?type=www to check your website's working if you can't see it from within your lan.
Back to top View user's profile Send private message
iNaNimAtE
-


Joined: 05 Nov 2003
Posts: 2381
Location: Everywhere you're not.

PostPosted: Sun Mar 28, 2004 7:20 pm    Post subject: Reply with quote

Since I am not currently on the same IP as my server, I use http://www.websitepulse.com/tools.php3 instead. It lets you enter a hostname.
_________________
Bienvenidos!
Back to top View user's profile Send private message Send e-mail Visit poster's website AIM Address Yahoo Messenger MSN Messenger ICQ Number
Display posts from previous:   
Post new topic   Reply to topic    Aprelium Forum Index -> Networking Issues All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB phpBB Group